Saturday, September 1, 2012
Phil's bike
He's been working extra hard on this for a year. It's 90%now and today was the first ride. Nice work, Phil.
Monday, August 27, 2012
Giving up the domain name
I've had leftovermopeds.com for a few years now, but I'm tired of paying for it. It expires next week, so I'm going to give this a try instead. I hope it will be a little easier to update and it will work better with my phone. I will likely post pictures more often if that is the case.
Thursday, August 23, 2012
Newport I've been working on
A local guy has some property that we want to use for our rally at the end of September. I found this out when a mutual friend of our mentioned that he had an old "scooter" that he would like to get running again. That "scooter" turned out to be a Newport that was rode hard and put away wet...literally. The gas tank was so varnished on this bike that the engine hard seized on it after I got it running. I emptied out the old fuel and put new in, but I had no idea how much varnish was still sitting in the bottom of the tank. After the 2nd seize, a friend and I decided to give the tank a full Kreem treatment and get it fixed for good.
Now it is running well and it has a new long seat and a couple of new cables. I kind of like the combination of tall bars and a slammed long seat on this bike.
Now it is running well and it has a new long seat and a couple of new cables. I kind of like the combination of tall bars and a slammed long seat on this bike.
Thursday, August 9, 2012
Motobecane 50VLX
I just picked this up recently. It's really dirty and needs a lot of work, but it's complete. I'm not sure what I'm going to do with it. It has so much potential...I don't think I can just let it go.

Friday, July 13, 2012
Radium City presents: Parks and Wreck 2:...Don't Drink The Water
This is our 2nd rally. We learned a lot from the first one. This one will be better. Join us...we're about 1.5 hours SW of Chicago.

Facebook event page
Facebook event page
Tuesday, June 19, 2012
Got the Newport running again
Last weekend I put the cylinder back on the bike and fired it up. It started on the first kick, which was nice. I've ridden it around a few times since then and it seems to be doing well. I've been checking the head temperatures with a temp gun, since I had to give up on my trail tech temp gauge. I haven't taken it above half throttle yet, but the highest temperature I have seen is 260 degrees...and that's even with 90 degree ambient tempteratures. I'm looking forward to putting some more miles on it.
Friday, June 15, 2012
metrakit machining
After soft seizing my metrakit 65 at the lafayeti rally a few times, I decided to buy a larger piston and have the cylinder machined. This probably saved me $60 compared to buying a new kit, but it took a while to find a machine shop that was willing to do it. I picked it up last night and it looks pretty good. It doesn't have quite as much cross hatching as I would like, but it isn't bad. I'm going to run it and see how it does.
Piston size: 43.85mm
Bore size: 43.92mm
That's about .003" clearance, which is what I asked them to do.
I also upjetted a few sizes from 86 to 91...just in case. I was hoping I had an 88 jet but I don't. Maybe one of the other Radium City guys will come through for me.
Piston size: 43.85mm
Bore size: 43.92mm
That's about .003" clearance, which is what I asked them to do.
I also upjetted a few sizes from 86 to 91...just in case. I was hoping I had an 88 jet but I don't. Maybe one of the other Radium City guys will come through for me.
Subscribe to:
Posts (Atom)